- Model Number: ESP01THERMOSTAT
- Works With: HomeKit & Google Home
- Output: 90-250v AC(50/60Hz) 30VDC
- Wireless Standard: 802.11 b/g/n
- Max Wattage: 2200W
- Max current: 10A
- Channel: 1
- Working Voltage: 5 DC
- Dry Relay - NO COM NC
- Temperature Sensor: DS18B20
- Temp & Humidty Sensor: DHT21
Extra Feature
Device can be controlled like a normal on-off switch. There is an additional "Virtual Switch" accessory with "Thermostat" accessory on the screen. Virtual switch makes easier to make scenes-routines automations.
Everything at once!
Apple HomeKit
Google Home
Web UI
3.Party Http protocol integration,
Local Http server.
All in one with a single iot device - no Gateway / Hub required.
Make automations with homekit scenes and google home routines. You don't need iPad/Apple TV/HomePod in your home for remote control becuase we have Web UI - everything Synchronized
Features
Power of Esp8266 with our special firmware
Super Easy Setup
You will easily setup with single page, user firendly form.
FAQ
- Q:How to setup?
When you plug the device it will broadcast WiFi network : "HomeHome-xxxxxx" Password is "homehome" Join the network, make setup in captive portal;
-Select your device type
-Select switch type (momentry/toogle) and required gmail account.
-You can set static ip (optional) for the device but you must know your gateway ip & subnet mask.
-Enter your router name and password if it doesn't in the WiFi list "refresh network" or enter manually.
-Save.
You can change other device settings by entering ip address of your device like:
Auto Turn Off Feature - Set relay 1 auto off from 1 second to 64.800 seconds
Turn Back Feature - Turn to last position (on or off) when power failure or restarts.
- Q:Internet Required?
You can use Apple HomeKit and local http server (write your device ip in to a web browser) without internet.
Google Home and Web UI needs internet connection.
- Q:Updating device firmware?
If there is a firmware update, you will see in local http server page. Update will be done OTA - over the air.
- Q:3th Party Apps - HTTP Server Commands
You can control HomeHome.App with 3th party apps. Your email adress must be gmail so don't add @gmail.com
Turn on 1. relay: 'https://ip.address/1/on?myEmail'
Turn off 1. relay: 'https://ip.address/1/off?myEmail'
All state replies are in array for example: [0,1,2,2] 0 --> off , 1 --> on , 2 --> none
Get all relay states: 'https://ip.address/all?myEmail' 1-2-4 relay devices are using the same firmware so we push all together.
You can easly understand this is a 2 relay device. First relay is off, second relay is on in this example.
Smart WiFi DIY Single Switch & Thermostat For Apple Homekit Google Home
- Pre flashed hardware
- Worldwide Express delivery
- Setup in 3 minutes
- No hub-gateway required
You will get unassembled kit.